FAQ

Cevap: You should only have your vehicle's LPG conversion performed at authorized service centers that comply with applicable standards. You can safely have your conversion done at our 2A Authorized Service Centers, certified by the Chamber of Mechanical Engineers (MMO) and TSE.

Yes, we offer LPG conversion for direct injection engine types (FSI, TSI, GDI, EcoBoost, etc.) with our specially developed SDI (Gas Phase) and LDI (Liquid Phase) kits. These systems provide up to 50% fuel savings.

The most suitable model for your vehicle is determined based on technical specifications such as engine power, number of cylinders, and injection type. For detailed information, you can reach us at +90 (212) 321 52 52.

For partnered brands, 2A vehicle conversion does not affect the vehicle warranty. For other vehicles, additional coverage can be provided through the Engine Insurance option. Detailed information is available at our authorized dealers.

In LPG vehicles, there may be approximately 3% performance difference due to the nature of the fuel. 2A systems minimize this difference through advanced calibration. It is unnoticeable in daily use.

When you arrive with an appointment, the conversion process takes an average of 6 hours depending on the vehicle model.

For system costs and payment options, you can contact your nearest dealer by calling +90 (212) 321 52 52 or through the contact form at www.2a.com.tr.

To register the LPG conversion on your vehicle registration: 1) Obtain the project and warranty certificate from the service center. 2) Pass the TÜVTÜRK inspection. 3) Complete the notary approval. 4) Update the vehicle registration.

The gas leak test report must be obtained during the first technical inspection when registering the LPG system. In subsequent inspections, it does not need to be renewed unless modifications have been made.

If you suspect a gas leak, contact your nearest 2A Authorized Service Center or an MMO station. The system will be inspected free of charge.

If our authorized dealer cannot resolve the issue, you can contact our Corporate Technical Support team by calling 0212 321 52 52 or through www.2a.com.tr.

Periodic inspections of LPG dispensers are carried out by Provincial Directorates of Industry every 2 years.

In case of a broken seal, the Authorized Service Center must prepare a Seal Removal Report, and then a petition must be submitted to the Provincial Directorate of Science, Industry, and Technology.

To maintain dispenser performance, it is recommended that filters be replaced at least twice a year.

1) Is the stage motor running? 2) Is the compressor pressure above 5 bar? 3) Are the pneumatic valves open? 4) Has the tank level dropped below 10%? 5) Is the breakaway coupling properly seated?

The tank level may be low, and the pneumatic and manual valves may not be fully open. These points should be checked.

This is usually caused by the return valve being closed or partially open. The position of the valve should be checked.

9 03: No power. 9 10/11: Totalizer counter issue. 9 12: Nozzle not in place. 9 16: ATC error. 9 17: Low flow rate.

You can check whether a service center is authorized through the Authorized Service List on the 2A Mühendislik website. A stamped service form should be obtained after each service.

We have 27 authorized service centers across Turkey. We operate with a focus on customer satisfaction, and every complaint is evaluated impartially.

You can reach us through the contact form at www.2a.com.tr or by calling 0212 321 52 52.

Size en yakın Yetkili Teknik Servis yönlendirilebilir. Alternatif olarak pompayı onarım için fabrikamıza gönderebilirsiniz.

You can contact our relevant department by specifying the pump series through www.2a.com.tr or by phone.

Provide us with the model and serial number of your pump, and our expert team will offer you a customized solution.

Contact us with information such as fluid properties, ambient temperature, capacity, and ATEX requirements to determine the most suitable pump.